Remote Programming Instructions For Ford Mazda Mercury Lincoln CWTWB1U331

Important Notes Before You Start:

• This procedure requires a working ignition key
• These instructions are applicable to vehicles that have separate remotes, which are not integrated with the ignition key
• Ensure that all remotes expected to work for the vehicle are present. Any remotes that are not present during programming procedure will stop functioning until they are reprogrammed

Programming Instructions - Procedure 1

1. Close all the doors and make sure the key is out of the ignition.
2. Insert the car key in the ignition
3. Within 10 seconds, turn the car key to the "ON" position and then to the "OFF" position eight times. This procedure must end when the key is in "ON" position
4. Door will lock and unlock indicating that the remote is in "learning mode"
5. Press any button on the first remote within 20 seconds. The central locking system will cycle (lock/unlock) to confirm that the programming was successful
6. If you have a second remote: press any button on the remote within 20 seconds. The central locking system will cycle (lock/unlock) to confirm that the programming was successful
7. Turn the ignition to the "OFF" position. The locks will cycle again to indicate the end of the programming mode
8. Test all remotes. If any of the remotes did not program, then repeat the procedure from step 1

The activation process for the "learning mode", mentioned in the third step, may differ depending on the vehicle make/model/year. For example, instead of turning the ignition "ON" and "OFF" 8 times, it may be required to do so 5 times.

When the "learning mode" is successfully activated, the central locking system will indicate it by locking and unlocking the doors quickly.

Programming Instructions - Procedure 2 (if procedure 1 did not work)

1. Enter the vehicle
2. Fasten driver and passenger seat belts
3. Close all doors
4. Unlock all doors using the power lock switch on the driver's side door
5. Insert the car key in the ignition
6. Within 6 seconds, turn the car key to the "ON" position and then to the "OFF" position four times
7. The system will chime to indicate the activation of "learning mode". If the system does not chime, please repeat the procedure from step 1
8. Press then release the "LOCK" button on the remote within 20 seconds. The system will chime to confirm that the programming was successful
9. Repeat step 8 for all the remotes that need to be programmed
10. After programming all remotes, exit the programming mode by turning the key to "ON" position, and then to "OFF" position
11. Remove the key from ignition
12. Test all remotes. If any of the remotes did not program, then repeat the procedure from step 1

Helpful Links

• To purchase this remote for Ford F-Series E-Series, please visit this link
• To purchase this remote for other Ford models, please check this link
• To purchase this remote for Lincoln and Mercury, please check this link
• To purchase this remote for Mazda Tribute and B-Series, please check this link