Keyless Entry Remote Key Fob Replacement For 2008-2016 Chrysler Town & Country FCC ID: IYZ-C01C P/N: 56046708

Attention: In order for this remote to work on your vehicle, the existing one should have the same button combination, part number, and FCC ID. Please check below for compatible part numbers.

Compatible with The Following FCC IDs (Interchangeable)

• IYZ-C01C, IYZC01C, M3N5WY783X
  

Compatible with The Following Part Numbers (Interchangeable)

• 05026442AA, 56046708, 56046708AA, 56046708AB
  
• 56046708AC, 56046708AD, 56046708AE, 56046708AF
• 56046708AG, 05026197AA, 05026197AB, 05026197AC
• 05026197AD, 05026197AF, 68043593AA, 68043593AB
• 68043593AC, 68066873AA, 56046705AF, 05026238AB
• 56046709, 56046709AA, 56046709AB, 56046709AC
• 56046709AD, 56046709AE, 56046709AF, 56046709AG
• 05026198AB, 05026198AC, 05026198AD, 05026198AF
• 68043594AA, 68043594AB, 68043594AC, 68066874AA
• 68079546AA
• Emergency insert key part numbers: 68043590AC, 68029829AB, 68029829AA, Y171P, BY171P
• IC: 2701A-C01C, 2701AC01C

IYZ-C01C 56046708 Keyless Entry Remote For Chrysler Town & Country Fits

• 2008 Chrysler Town & Country
• 2009 Chrysler Town & Country
  
• 2010 Chrysler Town & Country
• 2011 Chrysler Town & Country
• 2012 Chrysler Town & Country
• 2013 Chrysler Town & Country
• 2014 Chrysler Town & Country
• 2015 Chrysler Town & Country
• 2016 Chrysler Town & Country

Key Fob Specifications

• Condition: New
  Brand: Aftermarket product
• Type: Integrated key fob transmitter
• Compatible with a standard keyless entry system
• 7 Buttons: Lock, Unlock, Remote engine start, Power door release (back gate), Right sliding door, Left sliding door, Panic alarm
• Frequency: 433 MHz
• All transmitters include a CR2032 battery and a blank emergency insert key blade

Programming Notes

• Do it yourself programming instructions are available
• Dealership or locksmith programming is required If vehicle was on ignition recall
• Two working remotes are required to perform DIY programming. If you do not have a remote, then an automotive locksmith or dealership programming is required
• Vehicles that are 2010 and up must be programmed by an automotive locksmith or dealership
• This keyfob is not compatible with KeylessGo systems, Push button ignition systems, or proximity systems
• Insert key blank must be cut by an automotive locksmith or dealership
  Your vehicle must be equipped with a keyless entry system